¨
145
USERÕS MANUAL
Model No. WEBE09900
Serial No.
Write the serial number in the
space above for future reference.
Serial Number Decal (Under Seat)
QUESTIONS?
As a manufacturer, we are com-
mitted to providing complete
customer satisfaction. If you
have questions, or if there are
missing parts, we will guarantee
complete satisfaction through
direct assistance from our factory.
TO AVOID UNNECESSARY
DELAYS, PLEASE CALL DIRECT
TO OUR TOLL-FREE CUSTOMER
HOT LINE. The trained techni-
cians on our customer hot line
will provide immediate assis-
tance, free of charge to you.
CUSTOMER HOT LINE:
1-800-999-3756
Mon.ÐFri., 6 a.m.Ð6 p.m. MST
CAUTION
Visit our website at
Read all precautions and instruc-
tions in this manual before using
this equipment. Save this manual
for future reference.
new products, prizes,
fitness tips, and much more!
Important Precautions
WARNING:
To reduce the risk of serious injury, read the following important precautions
before using the weight bench.
barbell with the same amount of weight on
the weight rests to balance the bench.
1. Read all instructions in this manual before
using the weight bench.
11. Keep hands and feet away from moving parts.
2. The weight bench is intended for home use
only. Do not use the weight bench in any
commercial, rental, or institutional setting.
12. Always wear athletic shoes for foot protec-
tion while exercising.
3. It is the responsibility of the owner to ensure
that all users of the weight bench are ade-
quately informed of all precautions.
13. The weight bench does not include weights.
The weight bench is designed to support a
maximum of 460 pounds, including the user,
a weight bar, and weights. Do not place more
that 210 pounds, including a weight bar and
weights, on the weight rests. Do not place
more than 130 pounds on the leg lever.
4. Use the weight bench only as described in
this manual.
5. Use the weight bench only on a level surface.
Cover the floor beneath the weight bench to
protect the floor.
14. Make sure that the adjustment knobs are
inserted completely and tightened into the
uprights before beginning any exercise.
6. Inspect and tighten all parts each time you
use the weight bench. Replace any worn
parts immediately.
15. When adjusting the position of the backrest,
make sure that the adjustment pin is inserted
through both adjustment tubes and that the
pin clip is attached (see page 10).
7. Keep children under the age of 12 and pets
away from the weight bench at all times.
16. If you feel pain or dizziness at any time while
exercising, stop immediately and begin cool-
ing down.
8. Always be sure there is an equal amount of
weight on each end of your barbell (not
included) when you are using it. When
adding or removing weights, always keep
some weight on both ends of the barbell to
prevent the barbell from tipping.
17. Always exercise with a partner. When you
are performing bench press exercises, your
partner should stand behind you to catch the
barbell if you cannot complete a repetition.
9. Do not use a barbell that is longer than six
feet with the weight bench.
18. When you put weight on the weight rests,
make sure you put at least ten pounds on the
leg lever to balance the weight bench.
10. When you are using the leg lever, place a
WARNING:
Before beginning this or any exercise program, consult your physician. This
is especially important for persons over the age of 35 or persons with pre-existing health problems.
Read all instructions before using. ICON assumes no responsibility for personal injury or property
damage sustained by or through the use of this product.
3
Before You Begin
Thank you for selecting the WEIDER¨ PRO 145 weight Service Department toll-free at 1-800-999-3756,
bench. The versatile WEIDER¨ PRO 145 weight bench Monday through Friday, 6 a.m. until 6 p.m. Mountain
is designed to be used with your own weight set (not
included) to develop every major muscle group of the
body. Whether your goal is a shapely figure, dramatic
Time (excluding holidays). To help us assist you,
please note the product model number and serial
number before calling. The model number is
muscle size and strength, or a healthier cardiovascular WEBE09900. The serial number can be found on a
system, the WEIDER¨ PRO 145 will help you to
achieve the specific results you want.
decal attached to the weight bench (see the front
cover of this manual).
For your benefit, read this manual carefully before
using the WEIDER¨ PRO 145 weight bench. If you
have additional questions, please call our Customer
Before reading further, please look at the drawing
below and familiarize yourself with the parts that are
labeled.
Weight Rest
Adjustment Knob
Upright
Backrest
Seat
Leg Lever
Adjustment Tubes
Weight Tube
4
Part Identification Chart
This chart is provided to help you identify the small parts used in assembly. The number in parentheses below
each part refers to the key number of the part. The second number refers to the quantity needed for assembly.
Important: Some parts may have been pre-assembled for shipping purposes. If you cannot find a part in
the parts bags, check to see if it has been pre-assembled.
M10 x 81mm Bolt (35)Ñ10
M10 x 72mm Bolt (14)Ñ1
M6 Washer (25)Ñ4
M10 x 65mm Bolt (18)Ñ2
M8 Washer (38)Ñ2
M8 x 58mm Bolt (39)Ñ1
M6 x 38mm Screw (16)Ñ4
M10 Washer (24)Ñ4
M6 x 16mm Screw (15)Ñ4
M8 Nylon Locknut (13)Ñ1
M4 x 16mm Screw (34)Ñ4
Spacer (37)Ð1
M10 Nylon Locknut (19)Ñ14
5
Assembly
Before beginning assembly, carefully read the
following information and instructions:
¥ As you assemble the weight bench, make sure
that all parts are oriented as shown in the draw-
ings.
¥ Place all parts of the weight bench in a cleared
area and remove the packing materials; do not
dispose of the packing materials until assembly
is completed.
THE FOLLOWING TOOLS (NOT INCLUDED)
ARE REQUIRED FOR ASSEMBLY:
¥ Two (2) adjustable wrenches
¥ One (1) phillips screwdriver
¥ One (1) rubber mallet
¥ Read each assembly step before you begin.
¥ For help identifying the small parts used in
assembly, use the PART IDENTIFICATION
CHART on the previous page. Note: Some
small parts may have been pre-attached for ship-
ping purposes. If a part is not in the parts bag,
check to see if it has been pre-attached.
¥ Lubricant, such as grease or petroleum jelly,
and soapy water will also be needed.
Assembly will be more convenient if you have the
following tools: A socket set, a set of open-end or
closed-end wrenches, or a set of ratchet wrenches.
¥ Tighten all parts as you assemble them, unless
instructed to do otherwise.
1. Before assembling this weight bench, be sure
that you have read and understand the infor-
mation in the box above.
1
1
30
7
The help of another person is recommended for
assembly.
1
7
Warning
Decal
19
20
Position the Crossbar (3) as shown. Attach the
Crossbar to each Upright Base (7) with four M10
x 81mm Bolts (35), a Support Plate (20), and four
M10 Nylon Locknuts (19). Note the position of
the warning decal and make sure the Upright
Bases are oriented exactly as shown.
3
19
20
30
20
Slide the Uprights (1) into the Upright Bases (7)
and secure them at the desired height with two
M10 x 67mm Adjustment Knobs (30).
35
20
35
2. While another person holds the Crossbar (3),
attach the Frame (2) to the Crossbar with two
M10 x 81mm Bolts (35) and two M10 Nylon
Locknuts (19).
2
3
2
35
19
6
3. Tap a 45mm Square Inner Cap (21) into the Front
Leg (8) as shown. Attach the Front Leg to the
Frame (2) with two M10 x 65mm Bolts (18), two
M10 Washers (24), and two M10 Nylon Locknuts
(19).
3
19
21
2
24
18
19
8
4. Tap two 45mm Square Inner Caps (21) into the
Leg Lever (4) as shown.
4
21
Tap a 1Ó Round Inner Cap (23) into the indicated
end of the Weight Tube (33). Insert the Weight
Tube into the Leg Lever (4). Make sure the
Weight Tube is angled up so that weights will
not slide off. Press the 1Ó Angled Cap (29) onto
the other end of the Weight Tube.
4
33
29
23
21
5. Lubricate the M10 x 72mm Bolt (14). Attach the
Leg Lever (4) to the Front Leg (8) with the Bolt
and an M10 Nylon Locknut (19). Do not overtight-
en the Nylon Locknut; the Leg Lever must be
able to pivot freely.
5
8
19
4
Attach the Spacer (37) to the Leg Lever (4) with
the M8 x 58mm Bolt (39), two M8 Washers (38),
and an M8 Nylon Locknut (13). Note: The Spacer
will fit tightly inside the Leg Lever.
39
38
14ÐLubricate
37
38
13
6. Press four 1Ó Square Inner Caps (12) into the
Backrest Tubes (5, 26). Press two 1Ó x 2Ó Inner
Caps (36) into the adjustment tubes.
6
6
Wide
End
12
With the wide end of the Backrest (6) positioned
as shown, attach the Backrest Tubes (5, 26) to
the Backrest with four M6 x 38mm Screws (16)
and four M6 Washers (25). Note: The Backrest
Tubes and the Backrest must be oriented
exactly as shown.
25
5
16
26
Adjustment
Tubes
12
25
16
36
25
16
7
7. Lubricate the M10 x 178mm Bolt (17). Attach the
Backrest Tubes (5, 42) to the Frame (2) with the
Bolt, two M10 Washers (24), and an M10 Nylon
Locknut (19).
7
6
Secure the Backrest (6) to the Frame (2) with the
Adjustment Pin (32) through one of the three sets
of holes in the adjustment tubes. Secure the
Adjustment Pin with the Pin Clip (27).
5
42
32
17ÑLubricate
Adjustment
Tubes
Make sure the Adjustment Pin (32) is com-
pletely inserted through both holes in the
adjustment tubes.
24
2
27
19
8. With the wide end of the Seat (11) positioned as
shown, attach the Seat to the brackets on the
Frame (2) with four M6 x 16mm Screws (15).
8
11
Wide
End
2
15
9. Tap two 3/4Ó Round Inner Caps (9) into each Pad
Tube (10). Insert the Pad Tubes into the holes in
the Leg Lever (4) and the Front Leg (8). Slide two
Foam Pads (22) onto each Pad Tube.
9
22
4
10
8
9
10
22
10. Make sure that all parts are properly tightened before you use the weight bench. The use of all
remaining parts will be explained in USING THE WEIGHT BENCH on pages 9 and 10.
8
Using the Weight Bench
The weight bench is designed to be used with your own weight set (not included). The steps below explain how
the weight bench can be adjusted. See EXERCISE GUIDELINES on page 11 for important exercise information
and refer to the accompanying exercise poster to see the correct form for several exercises. Refer also to the
exercise information accompanying your weight set (not included) for additional exercises.
Inspect and tighten all parts each time you use the weight bench. Replace any worn parts immediately. The
weight bench can be cleaned with a damp cloth and a mild, non-abrasive detergent. Do not use solvents.
ATTACHING WEIGHTS TO THE LEG LEVER
To use the Leg Lever (4), slide the desired weights
(not included) onto the Weight Tube (33).
4
WARNING:
Do not place more
than 130 pounds on the leg lever.
33
Weight
1
ADJUSTING THE UPRIGHTS
30
The Uprights (1) can be adjusted to five heights for
different exercises. To adjust the height, remove the
M10 x 67mm Adjustment Knobs (30) from both
Uprights and Upright Bases (7). Slide the Uprights to
the desired position and re-insert the Adjustment
Knobs.
1
7
WARNING:
Always set both
30
uprights at the same height. Make sure that
the adjustment knobs are inserted completely
and tightened into the uprights.
7
9
ADJUSTING THE BACKREST
The Backrest (6) can be used in a decline position, a
level position, or either of two incline positions. To
adjust the Backrest to the decline position, remove
the Adjustment Pin (32) and lower the Backrest until it
rests directly on the Crossbar (3). Re-insert the
Adjustment Pin and secure it with the Pin Clip (43).
6
32
To adjust the Backrest (6) to the level position, insert
the Adjustment Pin (32) through the top set of holes,
and secure it with the Pin Clip (43).
To adjust the Backrest (6) to an incline position, insert
the Adjustment Pin (32) as shown through one of the
lower two sets of holes in the backrest adjustment
tubes. Secure the Adjustment Pin with the Pin Clip
(43).
3
43
WARNING:
When adjusting the
Adjustment Tubes
position of the seat, make sure that the
adjustment pin is inserted through both
adjustment tubes.
10
Exercise Guidelines
THE FOUR BASIC TYPES OF WORKOUTS
¥ Muscle Building
PERSONALIZING YOUR EXERCISE PROGRAM
We have not specified an exact length of time for
each workout, or a specific number of repetitions or
sets for each exercise. It is very important to avoid
overdoing it during the first few months of your exer-
cise program, and to progress at your own pace. If
you experience pain or dizziness at any time while
exercising, stop immediately and begin to cool down.
Find out what is wrong before continuing. Remember
that adequate rest and a proper diet are also impor-
tant.
In order to increase the size and strength of your
muscles, you must push your muscles to a high per-
centage of their capacity. You must also progressively
increase the intensity of your exercise so that your
muscles will continually adapt and grow. Each individ-
ual exercise can be tailored to the proper intensity
level by changing the amount of weight used, or the
number of repetitions or sets performed. (A Òrepeti-
tionÓ is one complete cycle of an exercise, such as
one sit-up. A ÒsetÓ is a series of repetitions performed
consecutively.)
WARMING UP
Begin each workout with 5 to 10 minutes of light
stretching and exercise to warm up. Warming up pre-
pares your body for exercise by increasing circulation,
raising your body temperature and delivering more
oxygen to your muscles.
The proper amount of weight for each exercise
depends upon the individual user. It is up to you to
gauge your limits. Select the amount of weight that
you think is right for you. Begin with 3 sets of 8 repeti-
tions for each exercise that you perform. Rest for 3
minutes after each set. When you can complete 3
sets of 12 repetitions without difficulty, increase the
amount of weight.
WORKING OUT
Each workout should include 6 to 10 different exercis-
es. Select exercises for every major muscle group,
with emphasis on the areas that you want to develop
the most. To give balance and variety to your work-
outs, vary the exercises from workout to workout.
¥ Toning
To tone your muscles, you must push your muscles to
a moderate percentage of their capacity. Select a
moderate amount of weight and increase the number
of repetitions in each set. Complete as many sets of
15 to 20 repetitions as possible without discomfort.
Rest for 1 minute after each set. Work your muscles
by completing more sets rather than by using high
amounts of weight.
Schedule your workouts for the time of day when your
energy level is the highest. Each workout should be
followed by at least one day of rest. Once you find the
schedule that is right for you, stick with it.
EXERCISE FORM
¥ Weight Loss
In order to obtain the greatest benefits from exercis-
ing, it is essential to maintain proper form.
To lose weight, use a low amount of weight and
increase the number of repetitions in each set.
Exercise for 20 to 30 minutes, resting for a maximum
of 30 seconds between sets.
Maintaining proper form means moving through the
full range of motion for each exercise, and moving
only the appropriate parts of the body. Exercising in
an uncontrolled manner will leave you feeling
exhausted. On the exercise poster accompanying this
manual, you will find photographs showing the correct
form for several exercises. A description of each exer-
cise is also provided, along with a list of the muscles
affected. Refer to the muscle chart on page 12 to find
the locations of the muscles.
¥ Cross Training
In the pursuit of a complete and well-balanced fitness
program, many have found that cross training is the
answer. We recommend that on Monday, Wednesday
and Friday, you plan weight training workouts. On
Tuesday and Thursday, plan 20 to 30 minutes of aero-
bic exercise, such as cycling, running or swimming.
Rest from both weight training and aerobic exercise
for at least one full day each week to give your body
time to regenerate. By combining weight training with
aerobic exercise, you can reshape and strengthen
your body, plus develop a stronger heart and lungs.
The repetitions in each set should be performed
smoothly and without pausing. The exertion stage of
each repetition should last about half as long as the
return stage. Proper breathing is important. Exhale
during the exertion stage of each repetition and inhale
during the return stroke; never hold your breath. Rest
11
for 3 minutes after each set if you are doing a muscle
building workout, 1 minute after each set if you are
doing a toning workout, and 30 seconds after each set For motivation, keep a record of each workout. The
STAYING MOTIVATED
if you are doing a weight loss workout. Plan to spend charts on page 13 of this manual can be photocopied
the first couple of weeks familiarizing yourself with the and used to schedule and record your workouts. List
equipment and learning the proper form for each exer- the date, exercises performed, weight, and numbers of
cise.
sets and repetitions completed. Record your weight
and key body measurements at the end of every
month.
COOLING DOWN
End each workout with 5 to 10 minutes of stretching.
Include stretches for both your arms and legs. Move
slowly as you stretchÑdo not bounce. Ease into each
stretch gradually and go only as far as you can without
strain. Stretching at the end of each workout is very
effective for increasing flexibility.
Remember, the key to achieving the greatest results is
to make exercise a regular and enjoyable part of your
everyday life.
MUSCLE CHART
N
A. Sternomastoid (neck)
B. Pectoralis Major (chest)
A
O
C. Biceps (front of arm)
P
B
D. Obliques (waist)
E. Brachioradials (forearm)
F. Hip Flexors (upper thigh)
G. Abductor (outer thigh)
H. Quadriceps (front of thigh)
I. Sartorius (front of thigh)
J. Tibialis Anterior (front of calf)
K. Soleus (front of calf)
C
Q
D
R
E
S
F
L
T
L. Rectus Abdominus (stomach)
M. Adductor (inner thigh)
N. Trapezius (upper back)
O. Rhomboideus (upper back)
P. Deltoid (shoulder)
G
M
H
U
I
V
J
Q. Triceps (back of arm)
W
R. Latissimus Dorsi (mid back)
S. Spinae Erectors (lower back)
T. Gluteus Medius (hip)
K
U. Gluteus Maximus (buttocks)
V. Hamstring (back of leg)
W. Gastrocnemius (back of calf)
12
MONDAY
Date:
/
EXERCISE
WEIGHT
WEIGHT
WEIGHT
SETS
SETS
SETS
REPS
REPS
REPS
/
AEROBIC EXERCISE
EXERCISE
TUESDAY
Date:
/
/
WEDNESDAY
Date:
/
/
AEROBIC EXERCISE
EXERCISE
THURSDAY
Date:
/
/
FRIDAY
Date:
/
/
Make photocopies of this page for scheduling and recording your workouts.
13
R0800A
Part ListÑModel No. WEBE09900
Key No. Qty.
Description
Key No. Qty.
Description
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
2
1
1
1
1
1
2
1
4
2
1
4
1
1
4
4
1
2
14
4
3
Upright
Frame
Crossbar
Leg Lever
Right Backrest Tube
Backrest
Upright Base
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
#
4
1
4
4
1
1
2
1
2
2
1
1
4
10
2
1
2
1
1
1
Foam Pad
1Ó Round Inner Cap
M10 Washer
M6 Washer
Left Backrest Tube
Pin Clip
Carriage Bushing
1Ó Angled Cap
M10 x 67mm Adjustment Knob
60mm x 50mm Bushing
Adjustment Pin
Front Leg
3/4Ó Round Inner Cap
Pad Tube
Seat
1Ó Square Inner Cap
M8 Nylon Locknut
M10 x 72mm Bolt
M6 x 16mm Screw
M6 x 38mm Screw
M10 x 178mm Bolt
M10 x 65mm Bolt
M10 Nylon Locknut
Support Plate
45mm Square Inner Cap
Weight Tube
M4 x 16mm Screw
M10 x 81mm Bolt
1Ó x 2Ó Inner Cap
Spacer
M8 Washer
M8 x 58mm Bolt
UserÕs Manual
Exercise Poster
#
Ò#Ó Indicates a non-illustrated part. Specifications are subject to change without notice. See the back cover for
information on ordering replacement parts.
14
R0800A
Exploded DrawingÑModel No. WEBE09900
6
12
1
5
25
26
16
28
12
25
34
16
31
30
25
34
36
19
20
35
35
19
3
7
19
35
35
1
20
11
21
19
21
32
28
19
17
34
24
31
34
19
22
4
19
24
2
18
39
38
19
30
19
14
24
37
27
7
29
22
23
8
15
19
38
33
21
13
10
9
9
10
9
9
35
22
22
15
Ordering Replacement Parts
To order replacement parts, simply call our Customer Service Department toll-free at 1-800-999-3756, Monday
through Friday, 6 a.m. until 6 p.m. Mountain Time (excluding holidays). To help us assist you, please be pre-
pared to give the following information when calling:
¥ The MODEL NUMBER of the product (WEBE09900)
¥ The NAME of the product (WEIDER¨ PRO 145 weight bench)
¥ The SERIAL NUMBER of the product (see the front cover of this manual)
¥ The KEY NUMBER and DESCRIPTION of the desired part(s) (see the PART LIST and the EXPLODED
DRAWING at the center of this manual).
Limited Warranty
ICON Health & Fitness, Inc. (ICON), warrants this product to be free from defects in workmanship and mate-
rial, under normal use and service conditions, for a period of ninety (90) days from the date of purchase. This
warranty extends only to the original purchaser. ICON's obligation under this warranty is limited to replacing
or repairing, at ICON's option, the product at one of its authorized service centers. All products for which war-
ranty claim is made must be received by ICON at one of its authorized service centers with all freight and other
transportation charges prepaid, accompanied by sufficient proof of purchase. All returns must be pre-autho-
rized by ICON. This warranty does not extend to any product or damage to a product caused by or attribut-
able to freight damage, abuse, misuse, improper or abnormal usage or repairs not provided by an ICON
authorized service center, products used for commercial or rental purposes, or products used as store display
models. No other warranty beyond that specifically set forth above is authorized by ICON.
ICON is not responsible or liable for indirect, special or consequential damages arising out of or in connection
with the use or performance of the product or damages with respect to any economic loss, loss of property,
loss of revenues or profits, loss of enjoyment or use, costs of removal, installation or other consequential dam-
ages of whatsoever nature. Some states do not allow the exclusion or limitation of incidental or consequen-
tial damages. Accordingly, the above limitation may not apply to you.
The warranty extended hereunder is in lieu of any and all other warranties and any implied warranties of mer-
chantability or fitness for a particular purpose is limited in its scope and duration to the terms set forth herein.
Some states do not allow limitations on how long an implied warranty lasts. Accordingly, the above limitation
may not apply to you.
This warranty gives you specific legal rights. You may also have other rights which vary from state to state.
ICON HEALTH & FITNESS, INC., 1500 S. 1000 W., LOGAN, UT 84321-9813
Part No. 166296 R0800A
Printed in China © 2000 ICON Health & Fitness, Inc.
|