SAFEGUARDS
Please take the time to read this Owners Manual.
The following guidelines are designed to assure a safe and
properly installed Xtant Mobile Audio System.
All Xtant amplifiers and accessories are intended to be installed by a certified
professional mobile audio installation specialist. It is the recommendation of
Xtant Technologies that your new Xtant product(s) and all of your mobile
audio products be installed by your Authorized Xtant Select Dealer.
In st a l l e r ’s Re f e r e n c e (in se r t )
The Installer’s Reference is an insert included in this manual. It is designed to
assist your Authorized Xtant Select Dealer ’s professional installer.
Installation techniques critical to the creation of a high-performance mobile
audio sound system, (procedures for running wires, basic safety rules, and
system layout concepts) are not presented in this owners manual. All
Authorized Xtant Select Dealers have been chosen for their expertise in sys-
tem design and advanced installation capabilities and Xtant highly recom-
mends that you have all of your mobile audio products professionally
installed. If, however, you choose to install your Xtant amplifier yourself,
please refer to the Installer’s Reference prior to installation.
Wir in g Re q u ir e m e n t s
All Xtant amplifiers have minimum wire gauge requirements for Power,
Ground, Remote Turn-On, and Speaker cables. Please refer to the Installer’s
Reference for recommended wire gauges.
Fu sin g Re q u ir e m e n t s
All Xtant amplifiers have on-board power fuses. However, it is recommend-
ed that a fuse of like value be installed at the positive terminal of the battery.
In the case of a multi-amp system, use a fuse value equal to the combined
value of all (system amplifier’s) on-board power fuses.
Wa t e r a n d M o ist u r e
Install all Xtant amplifiers and accessories in a location free of
moisture or exposure to water.
3
TABLE O F CO N TEN TS
Sa f e g u a r d s
3
5
6
7
8
9
Xt a n t 330 0 x
Sp e c if ic a t io n s
El e c t r o n ic Cr o sso v e r
O p t io n a l Ac c e sso r y M o d u l e s
M a in t e n a n c e
Cu st o m er Rel a t io n s / Tech n ica l Ser v ices 10
Wa r r a n t y
11
O w n e r ’s In st a l l a t io n Lo g
12
In st a l l e r ’s Re f e r e n c e
In se r t
The 3300x is a “true” three (3) channel amplifier which com-
bines unique performance features with outstanding design
flexibility to provide a single chassis “system solution” for
most mobile audio applications. With its on-board crossover, a
high performance, bi-amplified system is easily configured.
By utilizing the on-board crossover’s four (4) RCA line outputs, you can steer
specific frequency ranges to additional amplifiers, thus eliminating the need
for external, active crossover components.
As with all Xtant “x” Series amplifiers, the 3300x incorporates an on-board
noise gate, forced convection thermal management system, and a Pulse Width
Modulated power supply for high efficiency and unsurpassed reliability. All
these features are encased in Xtant’s exclusive finish of stainless steel and
copper!
St a n d a r d Fe a t u r e s
Fo r c ed Co n v ec t io n Co o l in g : All Xtant “x” Series
amplifiers employ forced convection cooling for thermal man-
agement. An on-board thermal sensing circuit regulates fan
speed to maintain optimum operating temperature.
PWM Po w er Su ppl y : All Xtant “x” Series amplifiers feature
a fully regulated, Pulse Width Modulated power supply. This sup-
ply technology provides high efficiency and consistent output performance even
when battery voltage is less than optimum.
Cr o sso v er : 12 dB per octave “Butterworth” filter network with selectable
Bypass (Full Range), High Pass, or Low Pass modes of operation. Frequency selec-
tion is via a 12 pin Frequency Module (SIP). The amplifier is shipped with a 90 Hz
SIP installed, 13 other frequencies are available from your Xtant Dealer. Refer to
page 7 of this manual for a list of the available frequencies.
N o ise Ga t e: Provides deep muting when no musical signal is present. Features
include adjustable threshold and bypass switch.
Ba l a n c ed / Fl o a t in g In pu t : All “x” Series amplifiers offer input docking
ports which accept the optional Balanced Line Module (BLM-1). When added to
the input stage, this circuitry helps to eliminate “system noise” associated with
“ground-loops”.
M o d u l a r Ex pa n sio n Po r t : All Xtant amplifiers are supplied with a mod-
ular port used for docking any of Xtant’s signal processing modules.
Pr o t ec t io n Cir c u it r y : Both Thermal and Overcurrent protection has been
incorporated into all Xtant amplifiers. In the event of a problem, the amplifier will
reduce its power to maintain operation.
St a t u s LEDs: Four LEDs, visible through the cover, indicate operational status
of all Xtant amplifiers. The red LED illuminates when the amplifier is “ON”, the
green LED indicates when the noise gate is open, the yellow LED indicates that
overcurrent protection is employed and the orange LED indicates that the ther-
mal protection circuit is operational.
5
Xt a n t 330 0 x SP ECIFICATIO N S
Frequency Response
5 Hz to 50 kHz +/ – 1 dB
3
Number of Channels
Watts per Channel @ 4Ω
Watts per Channel @ 2Ω
Bridged Mono @ 4Ω (Stereo Channels)
2 x 60 + 1 x 180
2 x 120 + 1 x 360
1 x 240
Recommended Load (stereo channels) >2Ω Stereo / >4Ω Bridged
Recommended Load (Mono channel)
>2Ω
Distortion (THD)
< .04%
Measured: 20 Hz to 20 kHz at rated power, all channels driven 4Ω
Signal to Noise Ratio
> 100 dB
Measured: A-weighted in 20 kHz noise bandwidth @ 1 volt sensitivity
Damping Factor
Input Sensitivity
> 200 @ 100 Hz with 4Ω load
100 mV to 8.5 V RMS Unbalanced Source
100 mV to 17 V RMS Balanced Source
Input to Line Output Gain 0 dB +/ – 20 dB, Selectable in 10 dB steps
On-Board Crossover
Module Port(s)
Power Supply
Operational Voltage
Fusing
12 dB per Octave “Butterworth”
2 – Accessory and 2 – Balanced Line
Fully Regulated, PWM
11 to 15 Volts
Dual 50 Amp
Warranty
Limited 4 Year Parts and Labor
S E E P A G
E
E L E V E N
O
F
T H I S
M
A N U A L F O
R
C O
M
P L E T E
D
E T A I L S
6
O N -BO ARD ELECTRO N IC CRO SSO VER
All Xtant “x”, and “ix” Series 2 channel amplifiers have on-
board, two-way electronic crossovers. Xtant 3 and 4 channel models feature
two independent two-way crossovers. Each crossover is tied to a set of inputs
and controls the frequency range of the associated amplifier. Independent fre-
quency selection is provided for both the High and Low Pass sections. A set
of selectable RCA line outputs (to feed additional components) are included
with each crossover. In addition, each crossover features two on-board head-
er jumpers (one for the amplifier and one for the RCA line outputs) which
allow you to select Bypass (Full Range), High Pass, and/ or Low Pass modes.
The “ix” Series models offer an additional Band Pass selection. When chosen,
the Band Pass selection is available via the Low Pass jumper position for the
RCA line outputs.
The following Frequency Modules (SIPs)* are available from your Xtant
Dealer: 50 Hz, 70 Hz, 80 Hz, 90 Hz, 120 Hz, 150 Hz, 300 Hz, 500 Hz, 700 Hz,
1 kHz, 3 kHz, 4 kHz, and 5 kHz.
Please refer to the Installer’s Reference (insert) for the Frequency Module recep-
tacle location and chart of frequency/ SIP value code numbers
* SIP: an acronym referring to multiple resistors in a Single In-Line Package
7
O P TIO N AL ACCESSO RY M O DULES
Xtant optional accessory modules are easily and quickly
installable by your Authorized Xtant Dealer. The upgrade mod-
ules snap into place on the amplifiers PC board when the top of the unit is
removed. These accessories enhance your entire system, expanding and cus-
tomizing performance for your unique applications.
PARAM ETRIC EQ UALIZATIO N M ODULE – PQ M 1
The PQM-1 is a precision tuning instrument, designed to be
adjusted with the use of a Real-Time-Analyzer. This true,
fully adjustable, one band parametric equalizer provides
individual frequency, Q/ bandwidth, and +/ - 18dB gain adjust-
ment controls. By utilizing one of three (3) frequency modules included, any
frequency from 20 Hz to 20kHz can be chosen. The “Q” ranges from 1 to 10
in value, allowing a wide variety of bandwidth adjustment to address the
subtle tuning requirements common to mobile audio systems. All 2-channel
Xtant amplifiers can accept one PQM-1. All 3/ 4-channel amplifiers will
accept two PQM-1 modules if desired (one PQM-1 per 2 channels of input).
24 DB / O CTAVE CRO SSO VER M ODULE – CM 24X
The CM-24X upgrades the standard on-board crossovers
provided on all Xtant “ix” and “x” Series amplifiers to a 24
dB per octave “Linkwitz - Riley” filter. The CM-24x module
improves loudspeaker polar response while its steeper slope
provides enhanced system design flexibility.
BALAN CED LIN E M ODULE – BLM 1
The BLM-1 upgrades all Xtant “x” Series amplifiers to include
Balanced / Floating Line Inputs, which are standard on all
“i” series products. The BLM-1 does not create balanced
line outputs for the standard, on-board crossover.
However, in most cases, the noise elimination benefits of
balanced lines will be passed through to amplifier(s) con-
nected to these outputs.
8
M AIN TEN AN CE
Re c o m m e n d e d Cl e a n in g Pr o c e d u r e s
Cl e a n i n g t h e f a n / Ci r c u i t Bo a r d – Ev e r y 9 0 D a y s
A.
The internal fan in all Xtant amplifiers need periodic cleaning.
If you are in a high dust environment, every 30 days is
recommended. We recommend that your dealer remove
the cover and clean the fan blades with a soft brush. Loose
dust can be removed with a vacuum hose.
Ca u t io n :
Have your dealer check the fan for obstructions if your
amplifier over heats. When the Thermal Protection Circuit
is engaged, the orange LED will be illuminated and power
may be reduced.
B.
Have your dealer check the circuit board for dust. If
present, use a low pressure air source to blow-off the dust
particles. DO NOT use a high-pressure source, brush or
any similar device to clean the circuit board!
Cl e a n in g t h e Am p l if ie r – Ev e r y 30 d a y s
A.
Clean the stainless steel cover with a light dust cloth. For a
more thorough cleaning, use window cleaner that is
ammonia free. Apply the cleaner to the cloth (not the
amplifier) and wipe the surface. Take care not to catch the
cloth on the copper mesh.
Ca u t io n :
B.
Do not allow liquids to touch the circuit board.
To polish the stainless steel cover use a commercially
available stainless steel cleaner/ polish. It is important to
note that stainless steel has a (directional) grain. Please
read the directions supplied with the polish before
beginning. As a rule of thumb, always polish with the
grain. Apply the cleaner/ polish to the cloth (not the
amplifier) and wipe the surface. Take care not to catch the
cloth on the copper mesh.
9
CUSTO M ER RELATIO N S
TECH N ICAL SERVICES
STATEM EN T O F PURPO SE
Our customer’s satisfaction is our purpose. You repre-
sent our present and our future. It is our goal to create
and nurture relationships based upon trust and respect.
This commitment is not taken lightly or just for today; it
is our way of doing business. We believe there is no
other way.
Xtant’s policies and procedures are designed, in the
event of a problem, to minimize the amount of your
“down-time” and inconvenience. It is our commitment
to service and return such product in no more than two
(2) working days from the time Xtant receives the
equipment. Please consider weekends or holidays
(which may fall within the time period) when estimat-
ing the return date of serviced product.
For technical assistance and information regarding
products and/ or installation, please contact Xtant’s
Customer Relations Department from 8:00 am to 5:00
pm MST– Monday thru Friday at:
P h o n e :
Fa x :
(6 0 2 ) 4 31 8 6 8 6
(60 2) 431 8 60 0
10
FOUR - YEAR LIM ITED U.S.A. WARRANTY
This warranty gives you specific legal rights, and you may also have other rights
which vary from state to state. Xtant Technologies Incorporated (Xtant)warrants its
amplifiers and accessories to be free from defects in materials and workmanship
under normal use and service for a period of four (4) years from the date of original pur-
chase when the unit is installed by an Authorized Xtant Select Dealer. Non-Authorized Dealer installed
products carry a one (1) year parts and labor limited warranty. The extent and conditions of Xtant’s Limited
Warranty are as follows:
1. Authorized Xtant Select Dealer Installed Products: Xtant will either repair or replace at no charge, to the
original purchaser, any unit which Xtant’s examination discloses to be defective and under warranty, pro-
vided the defect occurs within four (4) years from the date of purchase when the unit is installed by an
Authorized Xtant Select Dealer and the product is returned immediately to Xtant. This warranty is not
transferable.
2. Non-Authorized Xtant Dealer Installed Products: Xtant will either repair or replace at no charge, to the
original purchaser, any unit which Xtant’s examination discloses to be defective and under warranty, pro-
vided the defect occurs within one (1) year from the date of purchase and the product is returned immedi-
ately to Xtant. This warranty is not transferable.
3. The date of purchase and proof of Authorized Dealer Installation of an Xtant amplifier and/ or accesso-
ry must be established by an original (or copy of the original) sales receipt which must accompany the arti-
cle being returned for warranty work.
4. This warranty shall NOT apply to any Xtant unit found to have the original factory serial number
removed or defaced. All products received (by Xtant) for in warranty or out of warranty repair, with their
original serial numbers removed or defaced, will NOT be repaired and will be returned to sender, freight
collect.
5. The provisions of this warranty shall not apply to any Xtant unit used for a purpose for which it is not
designed, which has been repaired or altered in any way, or which has been connected, installed, or adjust-
ed other than in accordance with the instructions furnished in Xtant’s owner ’s manual. Nor shall this war-
ranty apply to any part which has been subject to misuse, neglect, or accident.
6. Xtant does not authorize any other persons to assume any other liability in connection with its products.
THIS WARRANTY IS THE ONLY EXPRESS WARRANTY MADE BY XTANT APPLICABLE TO ITS PROD-
UCTS. ANY IMPLIED WARRANTY OR MERCHANTABILITY OR FITNESS FOR A PARTICULAR PUR-
POSE APPLICABLE TO XTANT’S AMPLIFIERS AND OR ACCESSORIES IS LIMITED IN DURATION TO
THE DURATION OF THIS LIMITED WARRANTY. XTANT SHALL NOT BE LIABLE FOR THE INCI-
DENTAL, CONSEQUENTIAL, OR COMMERCIAL DAMAGES RESULTING FROM THE BREACH OF
THIS WRITTEN WARRANTY. Some states or provinces do not allow the exclusion or limitation of inci-
dental or consequential damages or limitations on how long an implied warranty lasts; so the above limi-
tations or exclusions may not apply to you.
7. Your unit will be serviced on an in-warranty basis within the warranty period for the correction of war-
ranted defects. If improper operation of your Xtant product should occur, contact your Authorized Xtant
Select Dealer for assistance with the return and factory repair of your Xtant product. If an Authorized Xtant
Select Dealer is not available, please contact Xtant’s Customer Relations Department at (602) 431 8686
from 8:00 am to 5:00 pm (MST) for assistance.
Xt a n t Te ch n o l o g i e s
7676 South 46th Street
Phoenix, Arizona 85040
TO RETURN XTANT PRODUCTS OUT OF WARRANTY: Contact Xtant’s Customer Relations
Department at (602) 431 8686 from 8:00 am to 5:00 pm (MST) for a Return Authorization Number. Return
the unit, postage prepaid, in the original protective carton. Please include a description of the problem and,
if desired, a request for an estimate of repair costs. Unless a request for an estimate is included, the unit
will be repaired as necessary. Repaired unit will be returned with an itemized statement, C.O.D.
11
O WN ER’S IN STALLATIO N LO G
Upon installation of your mobile audio sound system, your
Authorized Xtant Select Dealer will complete this log. Keep this
owner’s manual with your vehicle as a reference for all amplifier
settings.
o w n e r ’s n a m e :
Ve h ic l e :
y ea r :
x t a n t a m p l if ie r se r ia l n o .
i n p u t s e n s i t i v i t y (c ir c l e set t in g )
Fr o n t In p u t s (2 c h a n n el s)
Re a r In p u t s (m o n o c h a n n el )
–20 dB
–10 dB
0 dB
+10 dB
+20 dB
–20 dB –10 dB
0 dB
+10 dB +20 dB
Fr o n t Cr o sso v er (2 c h a n n el s)
c ir c l e ju m per set t in g :
Am p l if ie r :
Rea r cr o sso v er (m o n o ch a n n el )
c ir c l e ju m per set t in g :
Am p l if ie r :
a l l
h ig h
l o w
a l l
r c a o u t p u t s
a l l h ig h
h ig h
l o w
r c a o u t p u t s
a l l
h ig h
l o w
l o w
f r eq u en cy v a l u e (2 c h a n n el s)
f r eq u en cy v a l u e (m o n o ch a n n el)
SIP H ig h Pa ss FQ
SIP H ig h Pa ss FQ
sip l o w pa ss FQ
sip l o w pa ss
FQ
o u t p u t g a in a d j u st m e n t
n o ise g a t e a d j u st m e n t
sw it c h :
o n
o f f
LEFT RIGH T M O N O
t h r e s h o l d p o s i t i o n
(d r a w a r r o w po sit io n )
Ac c e sso r y m o d u l e s (c ir c l e set t in g )
(d r a w a r r o w po sit io n )
CM 24X
f
r
o
o
n
t
r
e
a
r
p q m -1 (FRONT) y e s
n o
y e s
n o
y e s
n o
p q m -1 c h ip f r e q u e n c y
B LM - 1
f
r
n
t
r
e
a
r
p q m -1 (REAR) y e s
n o
y e s
n o
y e s
n o
p q m -1 c h ip f r e q u e n c y
Xt a n t Se l e c t De a l e r
p h o n e :
in st a l l a t io n sp e c ia l ist :
d a t e in st a l l e d :
REV
1197
12
|