BEX 4 CONTROL SYSTEM
3-BAND EQUALIZER
MAGNETIC PICKUP
BATTERY COMPARTMENT
MASTER VOLUME CONTROL
PIEZO PICKUP ON BRIDGE
BALANCE CONTROL FOR
MAGNETIC PICKUP / PIEZO PICKUP
MAGNETIC PICKUP
PIEZO PICKUP
OUTPUT JACK
I 3-Band Equalizer
EQUALIZER Controls
LOW : Boosts or cuts the level of the
low frequencies.
MID : Boosts or cuts the level of the
middle frequencies.
HIGH : Boosts or cuts the level of the
high frequencies.
BAT. (Battery Check) Indicator
This indicator will light when the battery
needs to be replaced.
Please replace the battery as soon as
possible when the BAT. indicator lights
(see battery replacement below).
I Battery Replacement
DC9V
6F22
(S-006P)
Catch
q Press the catch on the battery holder
in the direction indicated by the arrow
in the illustration in order to unlock it.
w Remove the old battery from the bat-
tery case, and insert the new battery
making sure that the (+) and (–) ter-
minals of the battery.
e Press firmly so that the battery case
locks into place.
Use only a DC9V, 6F22 (S-006P) or
equivalent battery.
QC54910
99.Nov.
Printed in Taiwan
|